SPECIAL LUBRICANTS

PURALUBE CONCENTRATE

SUPER LUBRICANT FOR TOTAL TREATMENT OF INTERNAL COMBUSTION ENGINES, GEAR BOXES, DIFFERENTIALS, AIR COMPRESSORS, INDUSTRIAL EQUIPMENT.

PURALUBE REDUCES FRICTION OF METAL AGAINST METAL

A LUBRICANT THAT PERFORMS MIRACLES BY RESURFACING THE METAL

Metal surfaces, no matter how highly polished, reveal microscopic peaks and valleys. When two metal surfaces come into contact, frictional forces are created which cause wear, heat buildup and greater use of energy. The resulting wear creates low spots in the bearing surfaces, wear patterns on camshafts, lifters and gears. Contaminants in the oil can cause scratches or scores in the metal, on the gears and in the cylinder wall, resulting in loss of compression, fuel dilution of the oil and blowby.

PURALUBE CONCENTRATE SUBSTANTIALLY IMPROVES LUBRICATION AND EXTENDS METAL  LIFE IN SEVERAL WAYS:

PuraLube contains a very sophisticated formulation that actually resurfaces the metal by filling in scratches, scores, worn or low spots and existing voids and imperfections in the metal. The filling or resurfacing action makes the metal surface smoother, thereby reducing friction - the main cause of metal failure.

PuraLube contains a superior anti-friction and anti-wear agent that reduces the friction created by metal to metal contact. It substantially improves the lubricity of normal lubricants thereby reducing heat, metal fatigue and wear patterns on camshafts, lifters, followers, rod bearings and gears.

PuraLube contains an excellent detergent package that cleans the metal surfaces as it lubricates, preventing the buildup of paraffin, varnish, deposits and sludge.

PuraLube contains a very effective anti-foaming agent that reduces the oils tendency to foam during high speed operation by as much as 60%.

PuraLube’s hi-tech "platter" provides excellent residual lubrication. It protects metal surfaces during loss of oil circulation or pressure and during initial equipment startup before the lubricant begins to circulate.

PURALUBE CONCENTRATE

Is compatible with all types of oil: petroleum, vegetable and most synthetic based oils. For use in virtually all applications where oils are used to lubricate metal.

Air compressors
Air conditioning compressors
Wheel bearings (oil bath)
Differentials
Hydraulic systems
Small engines
Gear boxes
Manual transmissions
Industrial bearings
Locomotives
Stationary engines (generators, pumps etc.)
Automotive, aircraft, marine, truck and racing engines

PURALUBE CONCENTRATE IN DAILY TRANSPORTATION

Protects against dry starts
Increases performance
Increases compression
Increases mileage
Quiets the engine
Reduces emissions
Reduces friction
Reduces wear
Seals the rings

PURALUBE CONCENTRATE IN LIMITED USE VEHICLES

Limited/Seasonal use: RV, motorcycle, airplanes, boats

Coats the moving parts
Reduces rust
Reduces corrosion
Eliminates dry starts
Frees sticky valves
Seals the rings
Protects buddy bearings in boat trailers

CAUTION: Do not use in 2 cycle engines that mix gas and oil in the combustion chamber as found in chain saws, weed eaters and some outboard boat engines or motorcycles. Do not use in applications that utilize frictional clutches such as limited slip and positraction rearends. Not recommended for automatic transmissions and for power steering systems.

IMPORTANT: The use of the powerful combination of PuraLube Concentrate and ProTec's Fuel Catalysts PuraGas & PuraDiesel results in substantial maintenance-cost reductions and fuel savings.

Packaging: Pail, 55 gal. drum,  5 gal 

Protec Home Page
Back