TECHNICAL BULLETIN

SPECIAL LUBRICANTS

PURALUBE PRE-MIX IN OIL

A pre-mixed in oil that offers the same benefits as PuraLube Concentrate .

PuraLube Pre-Mix in Oil is for use in gasoline and diesel engines. is for use in gasoline and diesel engines.

PuraLube Pre-Mix in Oil treats the METAL not the OIL. It fills VOIDS & IRREGULARITIES IN:

Camshafts - Crankshafts - Cylinder Walls - Lifters - Bearings - Piston Rings - Gears -

INCREASES
Compression
Horsepower
Torque
Heat Transfer
Total Base Number

REDUCES
Friction
Heat-Wear
Oil Foaming
Blow-by
Fuel Dilution

REMOVES
Carbon Deposits
Contaminants
Urethane Varnish
Sludge
Soot

WILL NOT HARM

Catalytic Converters
Trap Oxidizers
Particulate Traps

WILL NOT VOID MANUFACTURER'S WARRANTY

Treat Ratio:

Add with each oil and filter change:

4 cylinder - 1/2 Qt.

6 cylinder - 3/4 Qt.

8 cylinder - 1 Qt

Larger engines - 1 Qt for every 10 Qts of oil capacity with a limit of 4 Qts of PuraLube Pre-Mix in Oil.

CAUTION : Do not use in 2 cycle engines that mix gas and oil in the combustion chamber as found in chain saws, weed eaters and some outboard boat engines or motorcycles. Do not use in applications that utilize frictional clutches such as limited slip and positraction rearends. Not recommended for automatic transmissions and for power steering systems.

IMPORTANT: The use of the powerful combination of PuraLube Pre-Mix in Oil and ProTec's Fuel Catalysts PuraGas & PuraDiesel results in substantial maintenance-cost reductions and fuel savings.and ProTec's Fuel Catalysts PuraGas & PuraDiesel results in substantial maintenance-cost reductions and fuel savings.

Packaging: 55 gal. drum, 5 gal. pail, case 12 bottles 32 oz

Protec Home Page
Back